DEFENSE AND SECURITY
RF Receiver System
It is a passive RF detection system, enabling the identification of unmanned and remotely controlled targets. These systems can be integrated with other systems. RF Systems are designed with passive sensors for the detection of platforms for use in border security and critical facility security (airport, oil refineries, power plants, etc.).
The RF Receiver System can be used in all weather conditions to detect command signals of stationary or moving targets entering the operational frequency bandwidth.
The RF detection system is a passive system that detects the command and communication signals of unmanned and remotely managed systems.
The system can be used as a standalone system or as a passive sensor network that can be controlled by a command and control system or a remote control station.
The system can be used in all weather conditions to detect command signals of stationary or moving targets entering the operational frequency bandwidth.
Thanks to its compact size, the system can be easily transported and installed anywhere.
| Frequency range | 300 MHz – 6000 MHz | |
|---|---|---|
| Scan Rate | 20 GHz with resolution 25kHz | |
| Polarization Mode | Vertical Polarization | |
| Detection Range | ≥5km | |
| Detection Technology | Spectrum Scan and Code Detection | |
| Minimum Detection Time | ≤3s | |
| Navigation Accuracy | ≤5o (RMS Standard Site) | |
| Sizes | 456mm x Height 352mm Radius | |
| Weight | ≤11kg | |
| System Power Requirement | ≤100W | |
| Power source | 220 VAC | |
| Data Interface | RJ45 |
Anti-Drone Radar
In order to eliminate drones, the first step is their detection. “Visual detection” is difficult as the threat can be so small and sometimes not visible to the naked eye due to weather conditions. On the other hand, it may be too late to avoid the threat if a drone that has come too close is seen with the naked eye. For this reason, the most critical system is the radar system, especially in the long-range detection of mini/micro UAVs.
Anti-Drone Radar is our system that provides high tracking accuracy for airborne threats that are effective in the worst weather conditions. The system is used in Anti-Drone, Border Security and Facility Security solutions.
The main information source of the system is a three-coordinate X-band surveillance radar station. The radar uses low-power solid-state transmitters that provide high reliability and a small sanitary protection zone. The radar station provides stable detection and tracking of highly maneuverable targets, as well as the ability to detect and track UAVs. It uses an adaptive system for detecting small-sized, low-contrast objects, high resolution, as well as selecting moving targets.
In addition, the radar station has a target classification software module. Preliminary recognition of the target type (UAV, bird, aircraft, helicopter) is provided by radar signals. The detection range of micro UAVs is about 7 km.
| Wavelength Range | 3 cm | |
|---|---|---|
| Azimuth Detection Zone | 360° | |
| Detection zone according to the angle of the ground | Between 0 and +30° | |
| Detection of UAVs and other small-sized objects with an ESR of about 0.2 m2 | Distance of at least 15 km and an altitude of at least 1.5 km | |
| Minimum Range | <300m | |
| Measurement of target coordinates : | ||
| - by distance | up to 10 m | |
| - with azimuth | up to 0.2 degrees | |
| - by ground angle (upper and lower beam diagrams in the intersection area) | up to 1 degree | |
| Azimuth rotation speed | 2.5 seconds |
Artillery Reconnaissance Radar
Artillery reconnaissance radar is designed for automatic search, detection and tracking of ballistic targets on flight paths, recognition of classes and calibers of firing systems, determination of enemy positions and falling coordinates of terminal ballistic targets. In addition, it alarms them of counter artillery attacks and anti-radar missile launches by adjusting the firing settings of friendly missile and artillery systems.
The total average error of the position of enemy weapon deployment and artillery at the maximum range is 0.2%.
Basics of Artillery Reconnaissance Radar Technical Specifications are given below;
| Maximum Weapon Detection Range – 152mm Gun – 120 mm Mortar Cannon | 18 km | |
|---|---|---|
| Minimum Weapon Detection Range | 5 km | |
| Number of Simultaneous Tracking | 12 | |
| Settlement / Relocation | 5 minutes | |
| Continuous Operation Time | 8 hours |
Interdata develops technologies that help government agencies investigate and prevent terrorism and crime to save thousands of lives worldwide. To assist government agencies in identifying and preventing a wide range of regional and international hazards, Interdata develops best-class technology for these situations.
Our products support government intelligence and law enforcement in using technology to overcome encryption challenges to stop and investigate terrorist and criminal activity.
Interdata offers a variety of adaptable platforms and solutions that enable customers to find, protect and collect the necessary information. Our technologies support organizations fighting global crimes such as illegal trafficking, cyber-attacks and financial transactions.
GSM ANALYSIS DEVICE provides the detection of devices using radio frequencies in the range of (700-2800) MHz in the operational area. Along with the analysis of regional GSM bands and broadcasts, it plays an important role in eliminating electronic threats in the operational region.
The device provides tactical and operational benefits, although it is of great importance to be used in areas such as smuggling, disaster situations, and border & facility security, especially in the fight against crime and terrorism. The use of the device in the activities of the Military and Civil Security units greatly increases the operational advantages and success rate and plays a major role in reducing the loss of life in disaster situations.
The device provides a customizable configuration with its advanced receiver and transmitter hardware, and offers solutions to every band used, regardless of place or generation.
The GSM network monitoring device works in the form of interpreting the data by converting the analog signal received from the RF blocks into digital and analyzing it. Whether the antenna used is directional or co-directional, the broadcast power of the base station, the gain value of the antenna according to the bands affect the RSSI Power value.
GSM Network monitoring devices have 2.4 Ghz Access Point connection capability. Scans are performed by applying software filters according to the selected band and generation. The device works on the collection and analysis of GSM and Spectrum data related to its operational region.
Presenting tactical information such as RSSI Power values, Surrounding frequency values are important functions of the device.
GSM countermeasure systems are responsible for detecting suspicious and potentially dangerous devices operating in GSM bands.
The use of the device in the operational area provides users with privacy and security. The device, which plays a major role in the effective and correct operation of tactical devices used by law enforcement, works to detect unauthorized or unauthorized operation and signal-emitting devices in the operational area.
The system is of critical importance in terms of the security of the region, facility, border, convoy and personnel, protecting data and keeping it in case of attack.
From sensor fusion and countermeasure capabilities to multi-spectral situational awareness and highly sensitive hazard warnings, GSM countermeasure systems offer a significant advantage that increases mission success and ensures the safety of life and property.
INTERDATA uses its in-depth experience and knowledge of electromagnetic spectrum operations to provide a clear picture of the threat landscape, the ability to defend against ever-evolving threats, and the capacity to use the spectrum for long-term tactical advantage.
GSM countermeasure systems offer in-depth data analysis opportunities with the contained data library, as well as a comparison of the detected devices in the GSM band. Its comparisons play an important role in device detection.
GSM broadcast detection systems detect devices that are in a certain area and transmit data with the GSM protocol.
It instantly scans over 2 simultaneous broadcast channels to ensure 24/7 security of the environment.
2G, 3G and 4G have 2W power output.
It can be managed remotely over IP.
It is used to maintain the security of the environment or to ensure the security of an unsafe environment.
GSM broadcast detection systems with advanced chip features are powerful and comprehensive and have ultra-far detection, ultra-high sensitivity, intelligent analysis and multiple discovery capabilities.
Protecting your privacy and security is of utmost importance.
The device provides multifunctional detection, including laser scanning, wireless RF signal detection and magnetic field detection.
With stronger sensitivity and wider detection frequency range, it efficiently detects faults, electrical equipment radiation and other signal sources.
GSM broadcast detection systems can be used in important business meetings, homes, hotel rooms, dressing rooms, bathrooms, car tracking, and government institutions. The sensitivity of the system is adjusted to the requirements.